Hello ! Namaste Your Problem Solver
Painting – Coating is the same? Even some of the painting/coating certified inspectors keep guessing the difference when such a question is raised during an interview. As an expert in the painting and coating field industry would like to highlight some of the main differences so that the confusion is cleared with many. Let … Read more
NCR – Non-Conformance Report or Non-Conformity Report is issued when a non-conformance or non-compliance is observed. When a product, service or process is not followed as per the specification or as per the standard a non-conformance report is issued by a quality assurance specialist. In the Coating industry, the coating specialist or the painting inspector … Read more
Powder Coating – What is Powder Coating? Powder coating is applied as a free-flowing powder in a completely dry form, think of it as paint without solvent that is applied on metal which is then cured under specified heat. It can be categorized in three main forms, thermosetting, thermoplastic and UV curable powder coatings. It … Read more
Galvanic Corrosion – also termed bimetallic corrosion, or dissimilar metallic corrosion is a very common painting fault. Galvanic corrosion occurs when two dissimilar metals are in contact with each other as a result of the flow of very small electric currents. These metals must be in electrical contact and must be exposed to an electrolyte. … Read more
Top Coat – In paint system provides protection mainly from UV (Ultra Violet Rays) therefore, Top coats are mainly used for aesthetic purpose in a paint system such as color and for gloss finish. Polyurethane coatings are widely used for top coats in a paint system. Polyurethane fall in two categories such as Aliphatic and … Read more