Interview Questions For Adma-Opco – Abu Dhabi

Interview Questions For Adma-Opco – The following are the most important interview questions asked by Adma-Opco. The interviews are normally held in presence of 2-3 interviewers and it can last for 2-3 hours.

The interviews can either be conducted personally or telephonically with APPS like Duo.

Here are few main questions which one can expect during any interview

– What is ISO 8501-3 and it is related to which stage

– Explain some of the welding defects encountered in painting

– How much radius shall be maintained on the steel surfaces related to rough edges

– What is a pre-inspection meeting

– What is a pre-job conference meeting

– What is thermal insulation and how many types of insulations are there

– What type of Fireproofing is done on equipment and structures for offshore and onshore

– What is TSA

– What is the profile requirement for offshore TSA coating

– What is the salt requirement for TSA coating

– Explain in details the sequences/stages for surface preparation and painting from start to finish

– What will be your course of action if you observe some discrepancy during mid stage of painting activities

– What is a re-coat interval and what action you will take if the recoat interval has exceeded

– Mention the different coating systems in Oil & Gas fields

– What are some of the fabrication defects found on steel surfaces and if found what will be your action

– What is the paint storage requirement and what will you check on a paint tin

– What will be your course of action when you find the salt contamination in excess of the project requirement

– What salt contamination meter is used to check the Chloride salts

– What is the difference between coating and painting

– Explain the functioning of the Airless Spray Machine

Here I have provided some of the main questions, if any additional questions are available then feel free to add them by commenting below through comment section.